Airmax Pondseries 1/2 HP Crown & Trumpet Nozzle - 8' H x 6' W 4.5' H x 30' W
AM-651889
Airmax PondSeries 1/2 HP Crown and Trumpet Floating Fountain
The PondSeries 1/2 HP Crown and Trumpet fountain produces two distinct spray patterns from a single floating unit. The crown nozzle cascades outward in a wide, layered display up to 4.5 ft (1.4 m) high and 30 ft (9 m) wide; the trumpet nozzle shoots a focused column upward to 8 ft (2.4 m) high and 6 ft (1.8 m) wide. Both nozzles attach to the same motor, so you choose the pattern that fits the occasion.
Aeration as Well as Display
Every spray pattern from a floating fountain increases surface agitation and oxygen exchange. The Crown and Trumpet's wider patterns break the water surface across a larger area than a single-nozzle fountain, improving dissolved oxygen transfer and reducing surface stagnation in ponds up to 1 acre. For ponds where aesthetics and water quality both matter, a fountain does both jobs without a separate aerator.
| Horsepower | 1/2 HP |
|---|---|
| Nozzles | Crown: 4.5 ft H x 30 ft W (1.4 m x 9 m); Trumpet: 8 ft H x 6 ft W (2.4 m x 1.8 m) |
| Voltage | 115V |
| Coverage | Suitable for ponds up to 1 acre (326,000 gal / 1.2 million L) |
| Installation | Floating, with mooring lines |
Installation
Float the unit in the centre of the pond and moor with included lines. Run the power cord to a GFI-protected outdoor outlet. Connect the desired nozzle. Nozzles swap without tools. Run during daylight hours or use a timer; continuous 24-hour operation is acceptable but not required for aeration benefit. Remove and store indoors when ice season begins.
Ideal for ornamental ponds and residential lakes up to 1 acre where a visible fountain serves both as a visual focal point and a supplemental aeration tool.