Wireless Receiver That Connects Compatible Pumps to the Smart Pond Controller
The Aquascape Smart Pump Receiver Large G2 is the wireless communication module that mounts on a compatible Aquascape pond pump and allows it to receive control signals from the Aquascape Smart Control system. Without the receiver installed, the pump operates at fixed settings only; with the receiver, pump speed, flow rate, and scheduled on/off cycles are managed remotely via the Smart Control hub.
Add Smart Control to a Compatible Pump
The Smart Control ecosystem allows pond owners to adjust pump flow, schedule automatic shutdowns for nighttime or winter, and monitor pump status from the Smart Control display without approaching the pond. The Large G2 receiver is the version designed for pumps in the higher flow range; confirm your pump model is compatible with the Large G2 before ordering, as receiver sizing is matched to pump electronics.
| Specification | Value |
|---|---|
| Compatible With | Aquascape Smart Control-compatible pumps (large G2 versions) |
| Function | Wireless receiver for Smart Control hub-to-pump communication |
| Connection Type | Wireless; pairs with Aquascape Smart Control hub |
| Generation | G2 (second generation) |
| Use Case | Remote pump speed control, scheduling, monitoring |
How to Use
Power off the pump before attaching the receiver. Mount the Smart Pump Receiver Large G2 to the pump following the installation guide for your specific pump model. Power on and follow the Smart Control hub pairing procedure to link the receiver to the hub. Once paired, pump flow adjustments and scheduling are managed through the Smart Control display or paired app. Confirm the receiver-to-hub signal is stable by adjusting pump speed from the controller and verifying the pump responds.
Ideal for Aquascape Smart Control system owners adding a large-format compatible pump to their network, and for replacing a failed G2 receiver on an existing Smart Control-connected pump installation.

