Flint & Walling 10 GPM, 1 HP, 4-Inch Stainless Steel Commander Plus Pump End
FW-4F10S10-PE
Balanced Flow and Power for Mid-Size Households
The Flint & Walling 10 GPM Commander Plus stainless steel pump end pairs 10 gallons per minute with a 1 HP motor, the most common combination for family homes on a productive well. It supplies enough volume for multiple bathrooms, a washing machine, and outdoor irrigation running at the same time without a drop in pressure.
Durable Materials for Long-Term Well Service
Stainless steel shell, cable guard, and hex drive shaft resist the corrosion that shortens the life of carbon steel pump ends in mineral-heavy groundwater. Noryl impellers and diffusers hold their tolerances over years of continuous cycling, and a one-piece motor-to-shaft coupling keeps vibration low at startup, protecting the motor seal over the life of the system.
| Specification | Value |
|---|---|
| Flow Rate | 10 GPM |
| Motor | 1 HP |
| Discharge | 1-1/4" NPT |
| Housing Material | Stainless Steel |
| Well Diameter | 4" minimum |
| Impellers | Noryl |
| Warranty | 1 year limited |
How to Use
Pair with a 1 HP, 4-inch Flint & Walling submersible motor. Have a licensed well contractor confirm the well's recovery rate supports 10 GPM before installation and set the pump depth with adequate clearance below the drawdown level.
Ideal for typical three- to four-bedroom homes on a well producing 10 GPM or more, covering normal daily household demand with room for outdoor watering.