Kink-Free Tubing 3/4" X 100' - Metric 19mm
EP-NK-007-100
True Metric Tubing for Metric Barbed Fittings and European-Built Equipment
This metric 19 mm kink free pond tubing gives you 100 ft (30.5 m) of flexible black tubing sized for true metric barbed fittings, the type found on many European-built pumps, filters, and feature kits, including Oase equipment. The smooth bore keeps friction loss low on small fountain and spillway runs, and the ribbed exterior curves around rockwork without pinching shut.
Metric Sizing Matters for a Leak-Free Seal
A 19 mm hose tail never seals quite right inside nominal 3/4" (19.05 mm) tubing made for North American barbs, and forcing the fit invites slow leaks under mulch and stone. This metric version seats snugly on 19 mm tails for a clean, clamped seal. If your plumbing uses standard North American barbed fittings, choose our standard 3/4" kink free hose instead. Rated from -26°C to 88°C (-15°F to 190°F), it stays flexible through Canadian shoulder seasons.
| Inside Diameter | 19 mm metric (nominal 3/4") |
| Length | 100 ft (30.5 m) |
| Colour | Black |
| Fits | 19 mm metric barbed fittings and hose tails |
| Construction | Smooth interior for maximum flow, ribbed exterior for crush resistance |
| Temperature Range | -26°C to 88°C (-15°F to 190°F) |
| Suggested Max Pump Flow | 750 GPH (2,839 LPH) |
| MPN | MNK07B |
How to Use
Cut the tubing squarely with a utility knife, soak the end in hot water for 30 seconds, push it fully over the 19 mm barbed fitting, then secure it with a stainless steel hose clamp. Keep runs short and straight where possible to preserve flow.
Ideal for metric-plumbed spillway bowls, small waterfalls, and fountain features running pumps up to about 750 GPH (2,839 LPH).