PondMAX Replacement 2" Pvc Fitting For PF4800/7200
31PS274
2 Inch Plumbing Connection for High-Flow PondMax Filters
The PondMax Replacement 2 Inch PVC Fitting connects the inlet and outlet plumbing to the PondMax PF4800 Pressure Filter and PondMax PF7200 Pressure Filter. A cracked or leaking fitting at these connection points is a common source of pressure loss and standing water around the filter housing.
Leak-Free 2 Inch Plumbing Connections
The PF4800 and PF7200 run at higher flow rates than smaller PondMax filters, so their inlet and outlet ports use 2 inch fittings sized for the additional volume. PVC fittings become brittle with UV exposure and freeze-thaw cycling over multiple Canadian seasons, and a hairline crack at the fitting threads can leak steadily even when the rest of the filter is sound. Replacing the fitting restores a tight seal without needing to replace the entire tank.
| Compatible With | PondMax PF4800 and PF7200 Pressure Filters |
|---|---|
| Size | 2" (5 cm) PVC connection |
| Material | Schedule 40 PVC |
How to Use
Drain the filter and depressurize the plumbing before removing the damaged fitting. Clean the threads on the filter body and apply PTFE tape or PVC-rated thread sealant to the new fitting before hand-tightening, then snug with a wrench. Avoid overtightening PVC threads, as this can crack the filter body itself.
Ideal for PF4800 and PF7200 owners tracking down a leak at the inlet or outlet connection after a full-season inspection.