ProEco Products Clear Floc - 16 oz.
WHAT IT DOES
ProEco Products Clear Floc clears up murky water caused by floating organic and inorganic particles. As well, it clumps particles together to be removed by filtration or to sink to the bottom of the pond.
WHEN TO USE CLEAR FLOC
Pro Eco Clear Floc works great after water is disturbed during routine pond cleanings, chemical treatments or whenever the pond becomes cloudy or murky.
HOW IT WORKS
Pro Eco Clear Floc is one of the most concentrated flocculants in the marketplace. It will quickly clear up murky water caused by floating organic and inorganic particles in koi ponds, water garden ponds and aquariums. Pro Eco Clear Floc works by pulling these floating particles together so they may be removed by a filter or simply settle to the bottom unnoticed.
DIRECTIONS FOR USE
Use at the rate of 1 fl. oz. per 500 gallons of water. For best results, dilute the dosage amount with 2-3 gallons of pond water, then apply the final solution to the pond, either by pouring the solution into the pond at the base of a waterfall or by pouring the solution around the edges of the pond. Final solution may also be sprayed over the entire surface of the water. Note: The goal is to get equal distribution of this formulation throughout the entire body of water. Murky water should clear up within hours of application. For problem ponds, a second dose may be required 24 hours later. Use as needed to keep the water clean and clear.
Before using Pro Eco Clear Floc, make sure your pond has vigorous aeration such as a fountain, waterfall or aeration device. Without aeration, your fish may be at risk due to decreased oxygen levels caused by decomposing organic matter.
KEEP OUT OF REACH OF CHILDREN. NOT FOR HUMAN CONSUMPTION OR FOR FISH INTENDED FOR HUMAN CONSUMPTION.